The calculating of bending machine pressure adjustment is based on the tensile strength of sheet metal.

If you have different sheet properties, although the calculation is the same, the actual force required is naturally different.

The calculating of bending machine pressure adjustment is based on the tensile strength of sheet metal. If you have different sheet properties, although the calculation is the same, the actual force required is naturally

The problem of the bending machine pressure adjustment can be adjusted from the two aspects If problems come only from themselves. one is to adjust the sheet tensile strength of the system, the other is to adjust the DA value in the system.

we can’t tell you the specific method since we don’t know what system you are using

However, this problem is not completely abnormal, long time overloading work, or unstable power supply, or increased friction of machine tool components may lead to this phenomenon, we must pay attention to more maintenance!

Direct angle programming with angle compensation function.
The positioning accuracy of grating ruler real-time detection, feedback correction, full closed-loop control, back-stop and slider dead-stop is <0.02mm.
The fast clamping device is used in the upper die and a wedge deformation compensation mechanism is used in the lower die.
With the function of multi-step programming, it can realize multi-automatic operation, complete one-time processing of multi-step parts, and improve production efficiency.
Ball screw and synchronous belt drive are optional for the imported hydraulic system with compact structure and back shield material。

If you still have problems with the bending machine pressure adjustment, please contact us below for solutions.