Press Brake Punch Shipment to Edmonton Canada

Press Brake Punch Shipment to Edmonton, Canada – Custom Punches and Back Gauge Fingers

JSTMT completed a press brake punch and Backguage accessory shipment to Edmonton, Canada, in September 15，2026. The shipment included three types of upper press brake punches and a set of back gauge fingers for sheet metal bending applications.

The order consisted of 4 pieces with a total weight of 198 kg and a total volume of 0.13 CBM. The shipment was transported by sea freight, discharged in Vancouver, and then forwarded to Edmonton.

Shipment Details

Item	Details
Destination	Edmonton, Alberta, Canada
Port of Discharge	Vancouver
Product	Press Brake  & Accessories
Tooling	85° Large Radius Punch, 30° Acute Punch, 85° Heavy-Duty Straight Punch
Accessories	Press Brake Back Gauge Fingers
Quantity	4 pieces
Gross Weight	198 kg
Total Volume	0.13 CBM
Shipping Method	Sea Freight
Inland Delivery	Vancouver to Edmonton

Press Brake punch Included in the Shipment

JSTMT supplies press brake tooling for different sheet metal bending applications and recently completed a press brake punch shipment to Edmonton, Canada. This shipment included three different upper punches designed for different press brake bending requirements.

85° Gooseneck Punch

The 85° large radius punch is designed for bending applications where a larger forming radius or specific upper-tool geometry is required.

The punch configuration can be selected according to material thickness, bending angle, required inside radius, and the customer’s press brake clamping system.

 

30° Acute Punch

The 30° acute punch is used for applications requiring a sharper bending angle.

Acute punches are commonly selected when the required part geometry cannot be achieved efficiently with a conventional 85° or 90° punch. The actual tooling configuration should be matched to the machine, material, thickness, and finished bend profile.

 

85° Heavy-Duty Straight Punch

The 85° heavy-duty straight punch is designed for applications requiring a robust upper tooling configuration.

Heavy-duty punches can be manufactured according to the required tooling dimensions, machine clamping system, working length, and bending application.

 

Press Brake Back Gauge Fingers

In addition to the three upper punches, this shipment included press brake back gauge fingers.

Back gauge fingers support accurate positioning of the sheet before bending. Their configuration needs to match the press brake back gauge system and the required workpiece positioning method. Press brake back gauge fingers are part of the machine’s positioning system. Learn more about press brake back gauge systems and how X, R and Z axes position the workpiece.

 

Press Brake Punches and Dies

JSTMT supplies both press brake punches and dies for different sheet metal bending applications. This shipment to Edmonton included upper punches, while matched punches and dies can also be manufactured according to machine configuration and bending requirements.

 

Custom Press Brake Punch for Different Bending Applications

A single press brake may require different punch configurations depending on the parts being produced.

JSTMT supplies various press brake tooling options, including:

• Standard upper punches
• Acute punches
• Gooseneck punches
• Heavy-duty punches
• Radius punches
• Custom punches
• Standard V dies
• Multi-V dies
• Hemming dies
• Offset dies
• Special-purpose tooling
• Back gauge fingers and selected press brake accessories

Tooling can be supplied for compatible press brake systems and manufactured according to customer drawings or technical specifications when a standard configuration is not suitable.Learn more about press brake punch types and their typical bending applications.

 

Tooling Selection Depends on the Bending Application

Choosing a suitable upper punch requires consideration of several parameters, including:

• Material type
• Material thickness
• Required bend angle
• Inside bend radius
• Flange dimensions
• Machine capacity
• Tool holder or clamping system
• Required punch length
• Production requirements

For heavy-duty or non-standard applications, the tooling should also be checked against the press brake’s allowable tooling load and machine configuration.For more detailed guidance, see our press brake tooling selection guide.

 

Sea Freight Shipment to Edmonton, Canada

The complete order consisted of 4 pieces weighing 198 kg with a total volume of 0.13 CBM.

The shipment was transported by sea freight to Vancouver, where it was then transferred for inland delivery to Edmonton, Alberta.

This type of multimodal shipment allows relatively heavy press brake tooling to be transported internationally while providing onward delivery to inland Canadian destinations.

 

JSTMT Press Brake Tooling Supply

JSTMT manufactures and supplies press brake tooling and related accessories for international sheet metal fabrication customers.

Our tooling range covers both standard and custom requirements, including punches, dies, special forming tools, and selected press brake accessories.

For custom tooling, customers can provide:

• Press brake brand and model
• Tooling system
• Machine clamping dimensions
• Material and thickness
• Bend angle
• Required radius
• Tool dimensions
• Drawing or sample

This information allows the required tooling configuration to be reviewed before production.

 

Request a Press Brake Tooling Quote

Need replacement or custom tooling for your press brake?

Send JSTMT your machine model, tooling dimensions, bending requirements, or drawing for a quotation.

 

Related Resources

• Press Brake Tooling
• Custom Press Brake Tooling
• Press Brake Punches
• Press Brake Dies
• Press Brake Tooling Compatibility
• How to Choose Press Brake Tooling