Yes, our Trumpf style tooling is designed to 100% match the Wila-Trumpf 20mm tang standard, ensuring seamless integration with your original clamping system.

Yes, our punches come with safety click buttons or pins, enabling vertical loading and unloading for faster setup times.

Air bending allows the part to springback to the desired angle. the punch pushes the workpiece into the die without pressing it against the walls. This takes less tonnage than bottom bending. Typically an air bending tool is designed with an additional 5 degrees more than the desired angle. Check with JSTMT for more press brake tooling details and Trumpf spare parts catalog.

The material used for Trumpf press brake tool belongs to cold working die steel, and the main performance requirements include strength, toughness, and wear resistance.

There are many materials that can be used to produce press brake tools, such as steel, alloy materials, polymer materials, and so on. However, at present, most of the materials for the production of press brake tools are steel, including T8 steel, T10 steel, 42CrMo, and Cr12MoV.

A Guide to Choosing the Right Press Brake Tonnage

Offset dies are designed to form two bends with one stroke. The measurement is needed as the in-to-out dimension from one plane to another. Talk to an engineer at JSTMT to discuss application and required tonnages.